Operating instructions

Paper and Other Media
48
4
Loading Paper in the Bypass Tray
Important
❒ Set the size and direction of the loaded paper using Smart Organizing Moni-
tor or the printer driver. Make sure the settings do not conflict. Otherwise, the
paper may jam or the print quality may be affected.
❒ Load paper with the print side down and in the short-edge feed direction.
❒ Duplex printing is not possible.
❒ You cannot use the bypass tray to feed in paper that requires a specified print-
ing position (such as preprinted paper). Use Tray 1 for such paper.
❒ If paper is curled, straighten it before loading, by bending it the paper in the
opposite direction to the curl, for example.
❒ Do not load paper while the printer is printing.
❒ Tray 1 and 2 are unavailable while paper is being loaded in the Bypass Tray.
❒ You cannot load paper when the printer is in Energy Saver mode. To disable
Energy Saver mode, click the {Stop/Start}
key one the control panel.
A Insert the top edge of the paper into the printer.
B Adjust the paper guides to the paper size.
ASH057S
ASH058S