AR-B1045 User’s Guide AR-B1045 Dual PCMCIA SLOT PC/104 PLUS SBC Edition: 1.0 Book Number: AR-B1045-06.1.
AR-B1045 User’s Guide @Copyright 2006 All Rights Reserved. Manual first edition Jan 19, 2006 The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer.
AR-B1045 User’s Guide Contents Contents ............................................................... 3 Introduction............................................................ 4 1.1 Specifications:........................................................................ 4 1.2 What You Have ...................................................................... 4 Installation ............................................................. 5 2.1 AR-B1045’s Layout..........................................
AR-B1045 User’s Guide 1 Introduction The PM-1045 is PC/104-Plus interface card with standard industrial mechanical dimension. It is equipped with a high performance 32-bit PCI bus Interface to CardBus interface chipset (Ricoh R5C486), which can support the 32-bit CardBus (Card-32), and the 16-bit CardBus (Card-16). It supports dual PCMCIA slots. The upper slot is slot one; the lower is slot two. 1.1 Specifications: • 2 PCMCIA PC-Card 95/97 sockets.
AR-B1045 User’s Guide 2 Installation This chapter describes how to install the AR-B1045. At first, the layout of AR-B1045 is shown, and the unpacking information that you should be careful is described. The jumpers and switches setting for the AR-B1045’s configuration 2.
AR-B1045 User’s Guide Bottom Placement AR-B1045 6
AR-B1045 User’s Guide 2.2 Operation mode selection • J1 : jumper setting Pin 1-2,3-4 open 1-2 open,3-4 short 1-2 short,3-4 open 1-2,3-4 short DESCRIPTION Mode 0 Mode 1 Mode 2 Mode 3 • Operation mode description Mode 0 Mode 1 Mode 2 Mode 3 PCICLK PCICLK0 PCICLK1 PCICLK2 PCICLK3 IDSEL AD20 AD21 AD22 AD23 INT 0 A B C D INT 1 B C D A REQ REQ0 REQ1 REQ2 REQ3 GNT GNT0 GNT1 GNT2 GNT3 2.3 Voltage selection • JP1 : Chip Voltage selection PIN 1-2 2-3 DESCRIPTION +3.3V +2.5V Note: RICOH R5C486 ->2.
AR-B1045 User’s Guide 3 Connection 3.1 CardBus connector The AR-B1045 provides a CardBus interface for CardBus devices and PCMCIA devices.
AR-B1045 User’s Guide 51 53 55 57 59 61 63 65 67 VCC A22 A24 VS2# WAIT# REG# BVD1 D9 CD2# 52 54 56 58 60 62 64 66 68 VCC A23 A25 RESET INPACK# BVD2 D8 D10 GND 3.2 PCI Bus Connector • CN3 : PCI Bus connector PIN A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 A24 A25 A26 A27 A28 A29 A30 define GND VIO AD05 CBE0# GND AD11 AD14 3.3V SERR# GND STOP# 3.3V FRAME# GND AD18 AD21 3.
