User Guide

Appendix
132
7
Exit pserver (In print server mode) Exits the print server
because the necessary print server settings
have not been made.
failed to connect smtp server. Failed to connect the SMTP server. This could
be because:
• There is no connection to the network.
• The network configuration is incorrect, so
there is no response from the SMTP server.
• The SMTP server name is incorrect.
• The specified SMTP server is incorrect.
• There is no specified SMTP server IP ad-
dress in the DNS server.
• Another server other than the SMTP server
has been specified.
• The SMTP server port number is incorrect.
failed to connect smtp server. timeout. Failed to connect the SMTP server due to time-
out. This could be because:
• The SMTP server name is incorrect.
• There is no connection to the network.
• The network configuration is incorrect, so
there is no response from the SMTP server.
failed to get smtp server ip-address. Failed to get the SMTP server IP address. This
could be because:
• The DNS server could not be found.
• There is no connection to the network.
• The specified DNS server could not be con-
nected to.
• Incorrect DNS server is specified.
• No specified SMTP server IP address in the
DNS server.
Frametype =<frame type name> The <frame type name> is configured to be
used on NetWare.
httpd start. An httpd has started.
IEEE 802.11b current channel <Channel> The current channel is displayed.
The value chosen by the user is displayed in ad
hoc mode.
The channel used in the access point is dis-
played in infrastructure mode.
(Example: Current channel is 11.)
IEEE 802.11b current channel 11
Message Description and Solutions