Technical data

3-30 Color Calibration

2. Click Calibrator.

3. Select a measurement method.

X-Rite DTP32, X-Rite DTP41, and EFI Densitometer ED-100 appear as the

measurement methods. If none of these options appears, make sure you are connected

to the Fiery 3850C.

4. Under Check Print Settings, choose the desired calibration set.

If there is more than one option, choose the appropriate calibration set for the print

resolution you use most often.

NOTE: For this calibration to take effect, the calibration set must be associated with one

or more output proﬁles. The default calibration set is already associated with the

default output proﬁle, so there is no need to make any new associations.

5. Under Generate Measurement Page, click Print.