Service manual

30 July, 2001 FUSING
3-33
Replacement
Adjustment
3.8.5 PRESSURE ROLLER
1. Fusing belt unit (☛ 3.8.4 FUSING BELT UNIT)
2. Paper entrance guide [A] (! x 2)
NOTE: When adjustment is not necessary, secure the two screws in the outer
positions. When adjustment is necessary, secure them in the inner
positions. Do not place the entrance guide at the upper position, or a paper
jam will occur.
3. Gear holder [B] (! x 1)
4. Gear [C] ($ x 1)
NOTE: When reassembling, check that the protruding part of the gear faces the
inside.
5. Fuse stay [D] (! x 1)
6. Thermistor bracket [E] (! x 1)
7. Pressure roller fusing lamp [F] (! x 1)
G060R804.WMF
G060R803.WMF
[F]
US: 350W
EU/AA 325W
[A]
[B]
[C][D]
[E]