Service manual

30 July, 2001 TRANSFER AND PAPER TRANSPORT UNIT
3-21
Replacement
Adjustment
3.7.2 TRANSFER BELT CLEANING UNIT
1. Turn the release lever counterclockwise (☛ 3.5 PCU AND DEVELOPMENT
UNIT).
2. Pull out the transfer unit until the entire unit is visible (☛ 3.7.1 TRANSFER
UNIT).
3. Transfer cleaning unit [A] (! x 1, 3 pins).
NOTE: When reassembling, check that the transfer unit lock bracket (☛ 3.7.1
TRANSFER UNIT) is installed and that the transfer unit release lever is put
back to the original position (☛ 3.5 PCU AND DEVELOPMENT UNIT).
After replacing the transfer belt cleaning unit, perform forced line position
adjustment (SP5-993-002 or ‘‘Maintenance menu – Color registration - Auto Adjust’
in User Program mode).
G060R810.WMF
[A]