Service manual

30 July, 2001 TRANSFER AND PAPER TRANSPORT UNIT
3-19
Replacement
Adjustment
3.7 TRANSFER AND PAPER TRANSPORT UNIT
3.7.1 TRANSFER UNIT
NOTE: When removing or installing the transfer unit, grasp the central areas of the
front and rear frame. Do not touch the transfer belt [A]. Do not damage the
entrance mylar [B].
1. Transfer unit lock bracket [C] (! x 1)
2. Turn the release lever counterclockwise. (☛ 3.5 PCU AND DEVELOPMENT
UNIT)
3. Pull out the transfer unit [D] until the entire unit is visible.
4. Grasp the transfer unit grips as shown above. Lift the unit to remove it.
NOTE: Grasp the front grip. Use caution not to damage the actuator on the rear.
G060R811.WMF
[A]
[D]
[C]
[B]