Service manual

30 July, 2001 PAPER FEED
6-41
Detailed
Descriptions
6.6.3 PAPER LIFT – TRAYS 1 & 2
The tray 1 set switch [A] and tray 2 paper size switches [B] detect when the paper
trays [C] are placed in the machine. When the machine detects that a tray has
been placed in the machine, the tray lift motor [D] rotates and the coupling gear [E]
on the tray lift motor engages the pin [F] on the lift arm shaft [G]. Then the tray lift
arm [H] lifts the tray bottom plate [I] until the paper lift sensor for the tray detects
that the top of the stack is at the paper feed position.
G060D102.WMF
[A]
[D]
[C]
[E][F]
[G]
[H]
[D]
[I]
[C]
[B]
[B]