Service manual

30 July, 2001 OPTIONAL UNIT INSTALLATION
1-7
Installation
1.5 OPTIONAL UNIT INSTALLATION
1.5.1 LIST OF OPTIONS
The available options are listed below. Except for the punch unit, installation is
explained in the Operating Instructions.
• Paper Feed Unit (500 sheets x 1)
• Paper Feed Unit (500 sheets x 2)
• Large Capacity Tray
• Two-tray Finisher
• Punch Unit
• Four-bin Mailbox
• DIMM Memory (64/128/256 MB)
• IEEE1394 Board
• HDD
• NVRAM
Note for Transporting the Machine
If it is difficult to slide the machine across the floor after installing the optional paper
feed unit or LCT, remove the two stands with the following procedure.
1. Remove all trays in the optional paper feed unit or LCT.
2. Remove the front stand [A] (! x 2).
3. Remove the rear stand [B] (! x 2, 2 brackets).
CAUTION: Reinstall the two stands in their original positions, or the machine might
tip over when drawing out the paper trays and so on.
G571R112.WMF
G568I901.WMF
[A]
[B]