Service manual

30 July, 2001 PHOTOCONDUCTOR UNIT
6-29
Detailed
Descriptions
6.4.5 WASTE TONER COLLECTION
The waste toner from the collection augers in the four PCUs drops into the waste
toner collection duct [A] at the rear of the PCU. The toner collection coils [B, C, D]
in the duct transport this waste toner towards the waste toner bottle (M [E], C [F], Y
[G], K [H]). The coils are driven by the development drive motor-CMY.
The toner [I] from the transfer unit drops directly into the waste toner bottle [J].
There are two holes in the waste toner collection duct. If the toner is unable to drop
through the hole [K] at the centre of the bottle, it is transported to the end of the
duct and drops into the bottle through the hole [L] at the end.
G060D306.WMF
[A]
[B]
[E]
[F]
[G]
[H]
[I]
[J]
[K][L]
[C]
[D]