Service manual

PRINTER ENGINE SERVICE MODE 30 July, 2001
5-42
7
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
Displays the number of revolutions of motors or clutches for each current maintenance
unit.
[ 0 to 9999999 / 0 / 1 revolution/step ]
When a unit is replaced, the machine automatically detects that the new unit is installed.
Then, the current PM counter value is automatically moved to the PM Counter - Previous
(SP7-906-10 to 20) and is reset to “0”. The total number of revolutions made with the last
unit replaced can be checked with SP7-906-10 to 20.
17 R:PCU [K] Target Revolution: 550675
18 R:PCU [Y] Target Revolution: 591813
19 R:PCU [M] Target Revolution: 591813
20 R:PCU [C] Target Revolution: 591813
21 R:Dev. [K] Target Revolution: 1076103
22 R:Dev. [Y] Target Revolution: 1173387
23 R:Dev. [M] Target Revolution: 1173387
24 R:Dev. [C] Target Revolution: 1173387
25 R:Oil Supply Target Revolution: 1861000
26 R:Fusing Target Revolution: 9303000
27 R:Transfer Target Revolution: 5163000
28 S:Waste Toner
29 S:Toner [K]
30 S:Toner [Y]
31 S:Toner [M]
32 S:Toner [C]
Displays the number of sheets printed until the
waste toner bottle becomes full or toner runs out.
[ 0 to 9999999 / - / 1 sheet/step ]
33 TonerSupply[K]
34 TonerSupply[Y]
35 TonerSupply[M]
803
36 TonerSupply[C]
*
Displays the total operating time for the toner
attraction pump.
[ 0 to 9999999 / - / 1 s/step ]
[PM Clear] PM Counter Clear
(Unit, [Color])
Dev.: Development Unit, PF: Paper Feed Rollers, Transfer: Transfer Unit
1 PCU [K]
2 PCU [Y]
3 PCU [M]
4 PCU [C]
5Dev. [K]
6 Dev. [Y]
7Dev. [M]
8Dev. [C]
9 Oil Supply
10 PF By-pass
11 PF Tray 1
12 PF Tray 2
13 PF Tray 3/LCT
14 PF Tray 4
15 Fusing
16 Transfer
804
50 All
* Clears the PM counter.
Press the Enter key after the machine asks
“Execute?”.
When a unit is replaced, the machine
automatically detects that the new unit is installed.
Then, the current PM counter value is
automatically moved to the b PM Counter -
Previous (SP7-906-1 to 25) and is reset to “0”.
NOTE: The LCT is counted as the 3rd feed
station.
[SC/Jam Clear] SC/Jam Counter Clear
807
1 SC/Jam Clear *
P
Clears the counters related to SC codes and
paper jams.
[Counter Clear]
808
1 Counter Clear *
P
Clears all counters.
See NOTE 1 after the SP table for a list of
settings cleared.