Service manual

PRINTER ENGINE SERVICE MODE 30 July, 2001
5-40
7
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
[Latest10Sclog]
1 Latest
2 Latest -1
3 Latest -2
4 Latest -3
5 Latest -4
6 Latest -5
7 Latest -6
8 Latest -7
403
9 Latest -8
* Logs the SC codes detected.
The 10 most recently detected SC Codes are not
displayed on the screen, but can be seen on the
SMC (logging) outputs.
[Total Jam]
502
1 Total Jam *
P
Displays the total number of jams detected.
[ 0 to 9999 / 0 / 1 sheet/step ]
[Jam Location]
D: Duplex, MB: Mail Box, F; Finisher, E: External, I: Internal
ON: On check, OFF: Off Check
3Tray 1:ON
4Tray 2:ON
5 Tray 3/LCT:ON
6Tray 4:ON
8 Regist.:ON
9 E Tray:ON
10 I Tray:ON
11 D:ON
12 D Exit 1:ON
13 D Exit 2:ON
14 D Exit 3:ON
15 D Feed: ON
20 MB Upper:ON
21 MB Lower:ON
51 Tray 1:OFF
52 Tray 2:OFF
53 Tray 3:OFF
54 Tray 4:OFF
61 Regist: OFF
63 E Tray:OFF
64 I Tray:OFF
65 D:OFF
66 D Exit 1:OFF
67 D Exit 2:OFF
68 D Exit 3:OFF
69 D Feed:OFF
100 F Entrance
101 F Shift Tray 1
102 F Shift Tray 2
103 F Staple
104 F Exit
105 F Drive
106 F Tray Up/Down
107 F Jogger
108 F Staple
109 F Exit
110 F Punch
504
111 F Jam Clear
* Displays the number of jams according to the
location where jams were detected.
NOTE: The LCT is counted as the 3rd feed
station.