Service manual

30 July, 2001 PRINTER ENGINE SERVICE MODE
5-39
Service
Tables
SP7-XXX (Data Log)
7
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
[M/C Counter] Meter Charge Counter
(Print, Development)
1 P: Total
7P: B&W
8 P: Full Color
Displays the values of the color counters.
[ -9999 to 9999999 / 0 / 1/step ]
10 D: Color
11 D: B&W
These SP modes are development counters for
the meter charge mode.
14 P: B&W: Contact Displays the number of B&W prints made while
the transfer belt contacted color PCUs in ACS
mode.
20 P: Full Color
21 P: B&W/Single
22 P: Single
23 P: B&W
25 P: Full Color
These SP modes are used for Japanese market
only.
28 P: Color
29 P: B&W
003
30 P: Color Total
*
P
These SP modes are print counters for the meter
charge mode.
[Other Counter]
1 Duplex
2 A3/DLT/Over420
007
3Staple
*
P
Displays counter values.
[ 0 to 9999999 / 0 / 1 sheet/step ]
[Size Counter] Paper Size Counter
4A3
5A4
6A5
13 B4
14 B5
32 11 x 17
36 8 1/2 x 14
38 8 1/2 x 11
44 5 1/2 x 8 1/2
101
128 Others
*
P
Displays the counter values for each paper size.
[ 0 to 9999999 / 0 / 1 sheet/step ]
[Feed Counter] Paper Feed Section Counter
1Tray 1
2Tray 2
3 Tray 3/LCT
4Tray 4
5By-pass
204
6 Duplex
*
P
Displays the number of sheets fed from each
paper feed station.
[ 0 to 9999999 / 0 / 1 sheet/step ]
NOTE: The LCT is counted as the 3rd feed
station.
[Punch Counter]
209
1 Punch *
P
Displays the number of times hole punching has
been done.
[ 0 to 9999999 / 0 / 1/step ]
[SC Counter]
401
1 SC Counter *
P
Displays the number of SC codes detected.
[ 0 to 9999 / 0 / 1/step ]