Service manual

PRINTER ENGINE SERVICE MODE 30 July, 2001
5-38
SP6-XXX (Peripherals)
6
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
[Punch] Punch Positioning
1 Punch 1 *
110
2 Punch 2 *
Adjusts the punching position.
Punch 1
US: 2 punch holes
Europe: 2 punch holes
North Europe: 4 punch holes
Punch 2
US: 3 punch holes
Europe: 4 punch holes
Increment: Holes move toward the paper center.
Decrement: Holes move toward the paper edge.
[ -7.5 to 7.5 / 0 / 0.5 mm/step ]
[Staple] Staple Position
111
1 Staple * Adjusts the stapling position.
Increment: Staple position moves toward the edge
of paper.
Decrement: Staple position moves toward the
center of paper.
[ -3.5 to 3.5 / 0 / 0.5 mm/step ]
NOTE: Although the adjustable range is ±3.5 mm,
the stapling position can be changed only by 1.0
mm when stapling one position at the front or rear
side even when the input value is more than 1.0.