Service manual

30 July, 2001 PRINTER ENGINE SERVICE MODE
5-37
Service
Tables
5
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
2 Pattern Selects a test pattern.
[ 0 to 23 / 0 / 1/step ]
0: None
1: 1-dot sub-scan line
2: 2-dot sub-scan line
3: 1-dot main-scan line
4: 2-dot main-scan line
5: 1-dot grid pattern (fine)
6: 2-dot grid pattern (fine)
7. 1-dot grid pattern (rough)
8. 2-dot grid pattern (rough)
9. 1-dot slant grid pattern
10. 2-dot slant grid pattern
11. 1-dot pattern
12. 2-dot pattern
13. 4-dot pattern
14. 1-dot trimming pattern
15. 2-dot trimming pattern
16. Cross stitch: sub-scan
17. Cross stitch: main-scan
18. Belt pattern
19. Belt pattern (vertical)
20. Checkered Flag
21. Grey scale (vertical)
22. Grey scale (Horizontal)
23. Solid
3 Single Color Selects the color for making a test pattern.
[0 to 6 / 6 / 1/step] Alphanumeric
0: Red 1: Green
2: Blue 3: Yellow
4: Magenta 5: Cyan
6: Black
4 Color Mode Selects the color mode for making a test print.
[0 or 1 / 0 / 1/step] Alphanumeric
0: Full Color 1: Single Color
5 Resolution Selects the resolution for making a test print.
[0 to 2 / 1 / 1/step] Alphanumeric
0: 600x600 1: 1200x600
2: 1200x1200
6 By-pass P-size Selects the paper size for making a test pattern
from the by-pass table.
[0 to 3 / 0 / 1/step ] Alphanumeric
0: A4 LEF 1: LT LEF
2: A3 3: DLT
997
7 Print Prints the test pattern with the settings specified
with SP5-997-001 to 006.
NOTE: When exiting the SP mode, the test print
mode is automatically canceled.
[Memory Clear 2]
1 ENG Setting Clears the engine settings except for counters.
998
2 ENG Counter Clears all counters.