Service manual

30 July, 2001 PRINTER ENGINE SERVICE MODE
5-33
Service
Tables
5
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
3 Menu # Selects the method for displaying the alert when
the life of the parts in a maintenance kit has
almost ended.
[ 0 or 1 / 1 / - ] Alphanumeric
0: Click 2
1: Click 1
The following table shows the machine condition
when the near end or end condition of each
maintenance unit is detected.
In this table, ‘-‘ means ‘normal operation’
4 Paper Feed # Determines whether to display the alert when the
life of the paper feed rollers is nearly ended.
[ 0 or 1 / 0 / - ] Alphanumeric
0: No Alert
1: Alert
5 Paper Trans. # Determines whether to display the alert when the
life of the transfer unit is nearly ended.
[ 0 or 1 / 0 / - ] Alphanumeric
0: No Alert
1: Alert
930
6 Factory Use
DFU
[Finisher Stack] Finisher Maximum Stack
961
1 Finisher Stack *
#
P
Enables or disables maximum stack mode for the
lower shift tray only in staple mode.
If this is enabled, the upper tray can be used for
stacking 500 sheets but it stays at the upper exit
(will not be used for stapling mode), and the lower
tray is used for stacking up to 2,000 sheets.
If this is disabled, the upper tray can be used for
stacking 500 sheets and the lower tray for 1,500
sheets.
[ 0 or 1 / 1 / - ]
0: Disabled
1: Enabled
NOTE: The main switch must be turned off and on
to effect the setting change.
Setting: 1 (Click 1) Setting: 0 (Click 2)
Near End Printing Near End Printing
A-Alert - - - -
B-Alert - - - -
C Alert Alert Stop Alert Alert Stop
D-Alert - - - -
E Alert Alert Stop Alert Alert Stop
F-Alert - - - -
G Alert Alert Stop Alert Alert Stop
H-Note----
A: Color PCU
B: Color Development Unit
C: Fusing Unit
D: Black Development Unit
E: Waste Toner Bottle
F: Black PCU
G: Oil Supply Unit
H: Paper Feed Rollers
NOTE: SP5-930-004 allows the alert for the paper feed
roller to be displayed.