Service manual

PRINTER ENGINE SERVICE MODE 30 July, 2001
5-10
1
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
11 H:N[FC] D 125 *
[ 100 to 190 / NA: 165 EU: 170
/ 5°C/step]
13 H:OHP [FC] *
[ 100 to 190 / 180 / 5°C/step]
15 P:N [K] S 125 *
[ 0 to 190 / NA: 145 EU: 155
/ 5°C/step]
16 P:N [K] S 185 *
[ 0 to 190 / NA: 155 EU: 160
/ 5°C/step]
17 P:N [K] D 125 *
[ 0 to 190 / NA: 135 EU: 145
/ 5°C/step]
18 P:N [K] D 185 *
[ 0 to 190 / NA: 145 EU: 155
/ 5°C/step]
19 P:N[FC] S 62.5 *
[ 0 to 190 / NA: 125 EU: 130
/ 5°C/step]
20 P:N[FC] S 125 *
[ 0 to 190 / NA: 145 EU: 160
/ 5°C/step]
21 P:N[FC] D 62.5 *
[ 0 to 190 / NA: 120 EU:125
/ 5°C/step]
22 P:N[FC] D 125 *
[ 0 to 190 / NA: 135 EU:150
/ 5°C/step]
24 P:OHP [FC] *
[ 0 to 190 / 160 / 5°C/step]
26 H:TH [FC] *
[ 0 to 190 / 175 / 5°C/step]
28 P:TH [FC] *
[ 0 to 190 / 155 / 5°C/step]
29 H:Envelop *
[ 0 to 190 / 175 / 5°C/step]
30 P:Envelop *
[ 0 to 190 / 155 / 5°C/step]
31 H: Slow Down * Sets the heating roller temperature for the printing
start condition when changing the process speed.
Fusing temperature must be decreased when the
machine changes to a process speed that is
slower than the current process speed (for
example, when the speed changes from 185
mm/s to 62.5 mm/s). The machine idles while
reducing the fusing temperature. When the fusing
temperature becomes lower than the ready
temperature, the machine starts printing.
Ready Temperature = Target temperature +
Temperature specified in this SP mode.
[ 1 to 20 / 5 / 1°C/step]
32 P: Slow Down * Sets the pressure roller temperature for the
printing start condition when changing the process
speed.
[ 1 to 20 / 10 / 1°C/step]
33 H:SP 62.5 *
[ -20 to 30 / 0 / 1°C/step]
34 H:SP 125 *
[ -20 to 30 / 0 / 1°C/step]
35 H:SP 185 *
[ -20 to 30 / 0 / 1°C/step]
36 P:SP 62.5 *
[ -20 to 30 / 0 / 1°C/step]
37 P:SP 125 *
[ -20 to 30 / 0 / 1°C/step]
105
38 P:SP 185 *
[ -20 to 30 / 0 / 1°C/step]
[Temp. Display] Fusing Temperature Display (Heating or Pressure)
1H Roller
106
2P Roller
Displays the current temperature of the heating
and pressure rollers.
[Paper Size] Tray Paper Size
902
1 Tray 1 A4/LT * Specifies the paper size for tray 1.
[ 0 or 1 / 0 / - ] Alphanumeric
0: A4 sideways, 1: LT sideways
Tray 1 can only use these two sizes.
US: 1 FA