Service manual

1.3 CHANGING THE TRAY PAPER SIZE ...............................................G569-2

1.4 LEFT TRAY PAPER END SENSOR ..................................................G569-3

1.5 TRAY LIFT MOTOR ...........................................................................G569-4

1.6 TRAY MOTOR AND STACK TRANSPORT CLUTCH........................G569-5

1.7 PAPER FEED CLUTCH .....................................................................G569-6

1.8 PAPER FEED UNIT ...........................................................................G569-7

1.9 UPPER LIMIT, RIGHT TRAY PAPER END,

AND RELAY SENSORS.....................................................................G569-8

1.10 PICK-UP/PAPER FEED/SEPARATION ROLLER............................G569-9

2 DETAILED SECTION DESCRIPTIONS ...............................G569-10

2.1 OVERVIEW ......................................................................................G569-10

2.1.1 MECHANICAL COMPONENT LAYOUT..................................G569-10

2.1.2 ELECTRICAL COMPONENT LAYOUT...................................G569-11

2.2 PAPER FEED...................................................................................G569-12

2.3 SEPARATION ROLLER AND PICK-UP ROLLER RELEASE ..........G569-13

2.4 TRAY LIFT .......................................................................................G569-14

2.5 NEAR END/END DETECTION.........................................................G569-15

2.6 PAPER STACK TRANSPORT MECHANISM...................................G569-16

2.7 RIGHT TRAY PAPER END DETECTION ........................................G569-17

TWO-TRAY FINISHER (Machine Code: G565)

1 REPLACEMENT AND ADJUSTMENT...................................G565-1

1.1 COVERS ............................................................................................G565-1

1.1.1 EXTERNAL COVERS................................................................G565-1

1.1.2 INNER COVER..........................................................................G565-1

1.2 POSITIONING ROLLER.....................................................................G565-2

1.3 TRAY 1 EXIT SENSOR......................................................................G565-2

1.4 ENTRANCE SENSOR/STAPLER TRAY ENTRANCE SENSOR .......G565-3

1.5 STAPLER TRAY.................................................................................G565-3

1.6 UPPER STACK HEIGHT SENSORS/

TRAY 1 UPPER LIMIT SWITCH ........................................................G565-4

1.7 EXIT GUIDE PLATE MOTOR.............................................................G565-5

1.8 LIFT MOTORS ...................................................................................G565-5

1.9 LOWER EXIT SENSOR .....................................................................G565-7

1.10 LOWER STACK HEIGHT SENSORS ..............................................G565-8

1.11 TRAY 2 SHUNT POSITION SENSOR .............................................G565-8

1.12 STAPLER UNIT................................................................................G565-9

1.13 STAPLER ROTATION HP SENSOR................................................G565-9

1.14 TRAY 1 INTERIOR.........................................................................G565-10

1.14.1 TRAY 1 COVERS..................................................................G565-10

tray Shift Sensors and tray release sensor ..................................G565-11

1.14.3 TRAY 1 SHIFT MOTOR ........................................................G565-11

1.14.4 BACK FENCE LOCK CLUTCH .............................................G565-11

1.15 FINISHER MAIN BOARD ...............................................................G565-12

1.16 PUNCH HOLE POSITION ADJUSTMENT.....................................G565-12