Operation Manual

Color Functions
29
2
When the {
{{
{Single Color}
}}
} key is
selected
A
AA
A
Select designation method of color
( [Basic Color], [User Color] ).
B
BB
B
Select the color, and then press
[OK].
Note
❒ When copied using the regis-
tered color, the original will be
copied lighter than the regis-
tered color.
❒ Press [i
ii
iLighter] or [Darkerj
jj
j],
and you can adjust the density
in 4 steps.
When the {
{{
{Two-color}
}}
} key is
selected
A
AA
A
Select either [Two-color] or [Red &
Black
].
When [
Red & Black
] is pressed
A Press [
OK
].
When [
Two-color
] is pressed
A Press [Change Color Setting].
B Press [Black Portion], and then
select the color to be replaced
by black.
Note
❒ When selecting a color from
the user colors, press [User
Color].
C Press [Non-black Portion], and
then select the color to replace
the black color of the original.
D Press [OK] twice.
Convert Colors
Copies by changing the color in the
original to a different color.
Note
❒ It is possible to specify up to 4
colors.
❒ The width of the color to be con-
verted can be adjusted in 5 levels.
If the color width is set to “Wider”
and red has been specified, colors
which are close to magenta or or-
ange, will also be converted. The
color width can be adjusted in the
“User Tools”. See p.120 “Color
Sensitivity”
A
AA
A
Press the {
{{
{Full Color}
}}
} key.
ThemisC1_EN_Copy_F_FM.book Page 29 Monday, December 27, 2004 4:10 PM