Operation Manual

Copying
28
2
Color Functions
Selecting a Color Mode
Select a Color mode that best suits
your originals and copying require-
ments.
Reference
For color images, see p.iii “What
You Can Do with This Machine
<Color Functions/Color Adjust-
ments>”
The following basic functions are ex-
plained in this section.
❖
❖❖
❖ Auto Color Selection
Judges the color of the original au-
tomatically, and copies either in
full color or black/white.
Note
❒ When using Auto Color Selec-
tion, the machine decides
whether to copy in full color or
black and white by examining
the central part of the original.
Because of this detection meth-
od, small full-color originals
such as business cards may be
detected as black and white.
When copying small full-color
originals, we recommend you
select the Full Color Copy.
❖
❖❖
❖ Full Color Copy
Copies by overlaying yellow, ma-
genta, cyan, and black.
❖
❖❖
❖ Black/White Copy
Copies in black regardless of the
color of the original.
❖
❖❖
❖ Single Color Copy
Copies in one designated color.
Note
❒ Yellow, magenta, and cyan will
be copied with one toner color,
but beige, orange, red, light
green, pink, green, marine blue,
blue and purple uses 2 toner
colors to copy.
❖
❖❖
❖ Two Color Copy
• Two Color Copy (Normal)
Copies black and other parts in
two specified colors.
Note
❒ You can select from basic
colors and registered colors.
• Two Color Copy (Red & Black)
Copies the red part in red, and
all the other parts in black or
white.
Note
❒ When the width of the color
is set to “Wider”, colors close
to orange and purple will be
recognized as red. This ad-
justment will be valid in
“Erase Color” and “Convert
Colors”. See p.120 “Color
Sensitivity”
A
AA
A
Select the type of color key.
AFZ033S
ThemisC1_EN_Copy_F_FM.book Page 28 Monday, December 27, 2004 4:10 PM