Operation Manual

Placing Originals
14
1
B
BB
B
Select the original orientation.
Standard orientation
A Make sure is selected.
90° turn
A Place the original in the land-
scape orientation, and then
press .
C
CC
C
Press [OK].
Placing Originals on the
Exposure Glass
A
AA
A
Lift the ADF.
Important
❒ Do not lift the ADF forcefully.
Otherwise, the ADF cover
might open or be damaged.
Note
❒ Be sure to lift the ADF more
than 30
°
. Otherwise, the size of
the original might not be detect-
ed correctly.
❒ Be sure not to press the ADF too
hard; otherwise, the left scale
and the Exposure Glass may be
bent and cause a malfunction.
B
BB
B
Place the original face down on
the exposure glass. It should be
aligned with the rear left corner.
1.
Reference mark
2.
Left Scale
Note
❒ Start with the first page to be
copied.
C
CC
C
Lower the ADF.
ThemisC1_EN_Copy_F_FM.book Page 14 Monday, December 27, 2004 4:10 PM