Operation Manual

Settings You Can Change with User Tools
115
5
❒ An image of approximately
1.5mm will not be displayed as
the width of the separation line,
when specifying solid or broken
lines.
❖
❖❖
❖ Double Copies Separation Line
You can select a separation line us-
ing the Double Copies function
from: None, Solid, Broken A, Bro-
ken B, or Crop Marks.
• None
• Solid
• Broken A
• Broken B
• Crop Marks
Note
❒ Default: None
❒ Line color (Full Color): Yellow,
Red, Cyan, Magenta, Green,
Blue, Black
❒ Separation lines cannot be spec-
ified when using [None].
❒ In “Black and White”, printing
will be done in black; in “Single
Color”, printing will be done in
the specified color; in “Two-
Color” (standard), printing will
be done in the specified color of
the black area; and in “Two-
Color” (Red and Black), print-
ing will be done in black.
❒
Images of approximately 1.5mm
will not be displayed as the
width of the separation line
when solid or broken lines have
been specified.
❖
❖❖
❖ Separation Line in Combine
You can select a separation line us-
ing the Combine function from:
None, Solid, Broken A, Broken B,
or Crop Marks. See p.51 “1 Sided
Combine” and p.52 “2 Sided Com-
bine”.
• None
• Solid
• Broken A
• Broken B
• Crop Marks
ThemisC1_EN_Copy_F_FM.book Page 115 Monday, December 27, 2004 4:10 PM