Operating instructions

Paper and Other Media
84
5
Thick Paper
Thin Paper
Paper thickness
• [Thick Paper]: 104.7 - 216 g/m
2
(28 - 58 lb.)
• [Thick Paper 1]: 104.7 - 157 g/m
2
(28 - 42 lb.)
• [Thick Paper 2]: 157 - 216 g/m
2
(42 - 58 lb.)
Printer setup Make the following settings using the control panel:
•Press the {Menu} key, select [Paper Input] , and then select one
from [Thick Paper], [Thick Paper 1] or [Thick Paper 2] for the select-
ed tray's paper type.
Printer driver setup Click [Thick 1] or [Thick 2] in the [Paper type:] list.
Enabled paper feeding tray Any input tray can be used.
Note
❒ Make sure paper is not stacked higher than the upper limit
mark (T) inside the tray. Make sure paper is not stacked higher
than the paper guides inside the bypass tray.
Duplex printing • [Thick Paper 1]: Possible
• [Thick Paper 2]: Not possible
• [Thick Paper]: Depends on the paper thickness
Additional cautions • Print speed is slightly slower than when using plain paper.
• When printing on the reverse side of thick paper that is already
printed on, select [Thick 1: Dup.Back] or [Thick 2: Dup.Back] from
[Paper Type:] using the control panel or printer driver.
Paper thickness
52 - 60.2 g/m
2
(14 - 16 lb.)
Printer setup Make the following settings using the control panel:
•Press the {Menu} key, select [Paper Input], and then select [Thin
Paper] for the selected tray's paper type.
Printer driver setup Click [Thin] in the [Paper type:] list.
Enabled paper feeding tray Any input tray can be used.
Note
❒ Make sure paper is not stacked higher than the upper limit
mark (T) inside the tray. Make sure paper is not stacked higher
than the paper guides inside the bypass tray.
Duplex printing Not possible