Operating instructions

Paper Recommendations

Glossy Paper

Note

❒ If the printing result is badly wet or smudged, change the setting on the

printer's control panel as the following:

•Press the {Menu} key, select [Maintenance], [General Settings], and then select

[Glossy Paper]. Select one from [Glossy Paper 1], [Glossy Paper 2], [Glossy Paper

3], or [Glossy Paper 4].

The greater number corresponds to the thicker setting.

The one of these items is normally detected automatically according to the

paper type you set. It is not necessary to change this setting when the print-

ing result has no problem.

Coated Paper

Note

❒ If the printing result is badly wet or smudged, change the setting on the

printer's control panel as the following:

•Press the {Menu} key, select [Maintenance], [General Settings], and then select

[Coated Paper]. Select one from [Coated Paper 1], [Coated Paper 2], [Coated Pa-

per 3], or [Coated Paper 4].

The greater number corresponds to the thicker setting.

The one of these items is normally detected automatically according to the

paper type you set. It is not necessary to change this setting when the print-

ing result has no problem.

Printer setup • Press the {Menu} key, select [Paper Input] , and then select

[Glossy Paper] for the selected tray's paper type.

Printer driver setup Select [Glossy] in the [Paper type:] list.

Duplex Printing Possible

Printer setup • Press the {Menu} key, select [Paper Input] , and then select [Coat-

ed Paper] for the selected tray's paper type.

Printer driver setup Select [Coated paper] in the [Paper type:] list.

Duplex Printing Not possible