Operating instructions

Paper and Other Media
78
5
*1
The size cannot be set automatically if you use the following model:
*2
The size cannot be set automatically if you use the following model:
•
The size is supported and the printer selects it automatically.
•
The size is supported, but it should be selected using the control panel.
•
The size is supported, but it should be set as a custom size using the control
panel.
The supported size may differ depending on the printer language you use.
Set as a custom size setting using the control panel.
The following sizes are supported:
• Tray 1: approximately 100 - 216 mm in width, and 148 - 355.6 mm in
length.
• Bypass Tray: approximately 70 - 216 mm in width, and 140 - 900 mm in
length.
• Paper Feed Unit (Tray 2/3): approximately 100 - 216 mm in width, and
210 - 355.6 mm in length.
•
The size is not supported.
C6 Env (4.49 × 6.38 inches)
K 114 × 162
DL Env (4.33 × 8.66 inches) K 110 × 220
Monarch Env (3
7
/
8
× 7
1
/
2
inches)
K 98.4 × 190.5
Custom Size - -
16K (7.68 × 10
1
/
2
inches)
K 195 × 267
Feed Direction Size (mm) Bypass Tray Tray 1 Paper Feed Unit (Tray 2/3)