Operating instructions

IEEE 802.11b (Wireless LAN) Configuration

C Select [IEEE 802.11b] using {T} or {U}, and then press the {OK} key.

D Select [Communication Mode] using {T} or {U}, and then press the {OK} key.

E Select the transmission mode of IEEE 802.11b using {T} or {U}, and then

press the {OK} key.

•The factory default is [802.11 Ad hoc].

• To use an IEEE 802.11b card for which the SSID (Network Name) setting is

not necessary, select [Ad hoc].

• The transmission mode of IEEE 802.11b can also be set using a Web brows-

er. For details, see Web browser, and “Configuring the Network Interface

Board Using Web Browser”, Software Guide.

F If [802.11 Ad hoc] or [Ad hoc] is selected for [Communication Mode], set the chan-

nel to use for transmission.

Confirm the network administrator for the channel to use.

G In the [IEEE 802.11b] menu, select [Channel] using {T} or {U}, and then press

the {OK} key.