Operating instructions

4. Configuration

Ethernet Configuration

Make the following network settings according to the network interface you are

using.

You can use SmartDeviceMonitor for Admin or a Web browser to make IP ad-

dress-related settings in a TCP/IP-capable environment.

Important

❒ Configure the printer for the network using the control panel.

❒ The following table shows the control panel settings and their default values.

These items appear in the “Host Interface” menu.

Note

❒ If [Auto-Obtain (DHCP)] is in use, the IP address, subnet mask, and gateway ad-

dress are all set automatically.

❒ Make this setting only when it is necessary. See Software Guide.

Setting Name Value

Auto- Obtain (DHCP) On

IPv4 Address 011.022.033.044

Subnet Mask 000.000.000.000

Gateway Address 000.000.000.000

Frame Type (NW) Auto

Effective Protocol • IPv4:

Effective

•IPv6:

Effective

• NetWare:

Effective

•SMB:

Effective

• AppleTalk:

Effective

Ethernet Speed Auto

LAN Type Auto