Operating instructions

Paper and Other Media
98
5
E Press the {Menu} key to return to the initial screen.
Note
❒ If the printing result is wet or smudged with the [Plain Paper] setting, Make
the following settings using the control panel:
• Select [Plain Paper] for the paper type according to the procedure above.
•Press the {Menu} key, select [Maintenance], [General Settings], and [Plain
Paper]. Select the tray you want to set, and then select [Plain Paper 1] or
[Plain Paper 2].
❒ The following paper types cannot be printed on both sides:
• Special Paper, Label Paper, Cardstock, OHP (Transparency), Thick
Paper 2 (157 - 209.4 g/m
2
), Thin Paper, Plain:Dup.Back (reverse side
of plain paper), Thick1:Dup.Back (reverse side of thick paper),
Thick2:Dup.Back