Service manual

Printer Engine Service Mode

M001 5-72 SM

7932 007 RFConductTime

This SP saves the rotation count (sec.) for the OPC

when a re-filled cartridge is detected. When a

re-filled cartridge is detected, the value for the OPC

rotation count is copied from the AIO ID Chip and

saved this SP.

Note:

 If the cartridge is not installed, if the AIO is not

set properly, or if the front door is open, no value

will be displayed because the machine cannot

communicate with the AIO.

 The counter increments by "1" for every 6 sec.

of drum rotation time.

 To calculate the actual time in sec., multiply the

displayed value by 6.

7932 008 RemainingCart

This SP displays the length of the service life that

remains for the OPC.

 The value is read from the AIO ID Chip.

 The number displayed indicates as a

percentage the amount of time remaining for the

OPC based on the number of drum rotations.

 If the cartridge is not installed, if the AIO is not

set properly, or if the front door is open, no value

will be displayed because the machine cannot

communicate with the AIO.

Important Note: This SP reads only the engine

information. This information is not sent to the

controller.

CÓPIA NÃO CONTROLADA