Service manual

Printer Engine Service Mode

SM 5-37 M001

Service

Tables

NVRAMUpload

5824

Uploads the UP and SP mode data (except for counters and the serial

number) from NVRAM on the control board to a flash memory card.

While using this SP mode, always keep the front cover open. This prevents

a software module accessing the NVRAM during the upload.

NVRAMDownload

5825

Downloads the content of a flash memory card to the NVRAM on the control

board.

Network

5828

This machine supports both Internet Protocols IPv4 and IPv6. IPv6 is the

next generation protocol designed by the IETF to replace IPV4. IPv6 adds

many improvements such as routing and network auto-configuration.

5828 022 ActIPv4 SbNet

This SP allows you to confirm the IPv4 subnet mask

setting that was used when the machine started up

with DHCP. For example, if the setting for the IPv4

subnet mask is "FFFFFF00H" this is displayed as

"255.255.255.000"

5828 023 ActIPv4Gatew

This SP allows you to confirm the IPv4 default gateway

setting that was used when the machine started up

with DHCP. For example, if the setting for the IPv4

gateway is "0C0A80001h" this is displayed as

"192.168.000.001".

5828 045 Bi Direct Centro

Enables and disables the Centro communication.

[0to1/1]

0:Off, 1: On

CÓPIA NÃO CONTROLADA