Service manual

Printer Engine Service Mode

SM 5-15 M001

Service

Tables

TonerEndJudg

3927

This SP code determines whether the machine disables printing when the

machine detects toner end.

 Even when toner end is detected, there is a small amount of toner left in

the AIO. If a user wants to print with the AIO until all toner is used up,

then set this SP to 1. But then, there is no toner end detection, and the

user must watch the print quality and change the AIO when prints

become too pale.

[0 to 1/0/1]

0: Yes (Printing stops when toner end is detected.)

1: No (Printing can continue even after toner end is detected.)

CÓPIA NÃO CONTROLADA