Service manual

Printer Engine Service Mode

M001 5-10 SM

Fusing Temp DFU

1105

Adjusts the fusing temperatures for printing and standby mode.

1105 001 Fusing Temp

Adjusts the fusing temperature for printing on normal

paper.

[150 to 195/180/5 deg.]

1105 002 Fusing T Stand

Adjusts the fusing temperature for standby mode.

[140 to 185/168/1 deg.]

1106

Fusing T Disp(lay)

Displays the current fusing temperature.

OHP Clutch Rt OHP Clutch Rotations

1902

Selects the number of rotations for the bypass feed roller when the paper

type is set for "Transparencies". Change this setting to "2" if jams occur

frequently when feeding transparencies from the bypass tray.

1 = 1 rotation, 2 = 2 rotations

Fusing Start DFU

1910

[Roller Turn / Normal]

Roller Turn: Warms up the fusing unit for 20 sec. just after the power switch

has been turned on or when the machine warms up from energy saver

mode.

Normal: There is no 20 sec. warm-up period. However, just after the main

power switch is turned on, the motor rotates to clean the drum.

Normal, Roller Turn

CÓPIA NÃO CONTROLADA