Service manual

Printer Engine Service Mode

M001 5-8 SM

5.3 PRINTER ENGINE SERVICE MODE

5.3.1 SERVICE MODE TABLE

Notation What it means

[range/default/step]

Example: [-9 to +9/+3.0/0.1 mm step]. The setting can be

adjusted in the range ±9, value reset to +3.0 after an NVRAM

reset, and the value can be changed in 0.1 mm steps with

each key press.

DFU Denotes "Design or Factory Use". Do not change this value.

SP1-xxx: Feed

Lead Edge Regist Leading Edge Registration

1001

Adjusts the printing leading edge registration for feeding from the trays and

duplex tray using the trimming area pattern (SP5-902-003 No.9).

Push [#] or [%] to select the settings (plus or minus).

The specification is 4±2 mm

1001 001 Bypass Tray Plain

1001 002 Bypass Tray Thick

1001 003 Main Tray Plain

1001 004 Main Tray Thick

1001 005 Optional Tray

1001 006 Duplex

[-40 to +40/0/1]

CÓPIA NÃO CONTROLADA