Quick Start Guide
Table Of Contents
- Operating Instructions Copy/Document Server Reference
- Manuals for This Machine
- What You Can Do with This Machine
- What You Can Do with This Machine
- TABLE OF CONTENTS
- Notice
- How to Read This Manual
- Functions Requiring Optional Configurations
- Display
- User Tools Menu (Copier and Document Server Features)
- 1. Placing Originals
- 2. Copying
- Basic Procedure
- Job List
- Copying from the Bypass Tray
- Colour Functions
- Copier Functions
- Adjusting Copy Image Density
- Selecting the Original Type Setting
- Selecting Copy Paper
- Preset Reduce/Enlarge
- Zoom
- Auto Reduce/Enlarge
- Size Magnification
- Directional Magnification (%)
- Directional Size Magnification (mm)
- Sort
- Stack
- Staple
- Punch
- Duplex
- One-Sided Combine
- Two-Sided Combine
- Series Copies
- Booklet/Magazine
- Margin Adjustment
- Erase
- Background Numbering
- Preset Stamp
- User Stamp
- Date Stamp
- Page Numbering
- Changing the stamp Colour
- Changing the stamp position
- Specifying the first printing page and start number ("P1,P2...", "-1-,-2-...", "P.1,P.2...", "1,2...", "1,2...", "Page 1,Page 2...")
- Specifying the first printing page and start number ("1/5,2/5…")
- Specifying the first printing page and start number ("1-1,1-2…")
- Image Repeat
- Double Copies
- Centring
- Positive/Negative
- Mirror
- Covers
- Designate
- Chapters
- Slip Sheets
- Storing Data in the Document Server
- Programs
- 3. Document Server
- Relationship between Document Server and Other Functions
- Using the Document Server
- Storing Data
- To register or change a user name (When using a user name registered to the Address Book)
- To register or change a user name (When using a user name not registered to the Address Book)
- To register or change a user name (When no name is registered to the Address Book)
- To change a file name
- To set or change a Password
- Changing User Name, File Name or Password of a Stored Document
- Checking the Details of a Stored Document
- Searching for a Stored Document
- Printing a Stored Document
- Deleting a Document
- Displaying a Document in Document Server with Web Image Monitor
- Downloading Stored Documents
- Storing Data
- 4. Appendix
- INDEX
Colour Functions
43
2
F Selects the new Colour to be converted.
You can adjust the density of each Colour in four steps.
To select User Colour, press [User Colour], and then select the Colour.
G After selecting all Colours to be converted, press [OK] three times.
H Place the originals, and then press the {Start} key.
Note
❒ The width of the Colour to be converted can be adjusted in five levels. If
the Colour width is set to [Wider] and red has been specified, Colours,
which are close to magenta or orange, will also be converted. The Colour
width can be adjusted in User Tools. This adjustment will be valid in
"Erase Colour". See "Colour Sensitivity", General Settings Guide.
❒ When you want to change the converted Colour in step
F
, press from [Con-
version 1] to [Conversion 4] and make the selection again.
❒ When changing between more than two Colours, repeat steps
D
to
F
.
❒ The full Colour counter will advance to "1".
Erase Colour
Copies by erasing a certain Colour in the image of the original.
A Press [Edit / Colour].
B Make sure that [Colour] is selected before pressing [Erase Colour].
C Select the Colour to be erased.
It is possible to select up to 4 Colours.
D After selecting all Colours to be erased, press [OK] twice.
E Place the originals, and then press the {Start} key.