Quick Start Guide
Table Of Contents
- Operating Instructions Copy/Document Server Reference
- Manuals for This Machine
- What You Can Do with This Machine
- What You Can Do with This Machine
- TABLE OF CONTENTS
- Notice
- How to Read This Manual
- Functions Requiring Optional Configurations
- Display
- User Tools Menu (Copier and Document Server Features)
- 1. Placing Originals
- 2. Copying
- Basic Procedure
- Job List
- Copying from the Bypass Tray
- Colour Functions
- Copier Functions
- Adjusting Copy Image Density
- Selecting the Original Type Setting
- Selecting Copy Paper
- Preset Reduce/Enlarge
- Zoom
- Auto Reduce/Enlarge
- Size Magnification
- Directional Magnification (%)
- Directional Size Magnification (mm)
- Sort
- Stack
- Staple
- Punch
- Duplex
- One-Sided Combine
- Two-Sided Combine
- Series Copies
- Booklet/Magazine
- Margin Adjustment
- Erase
- Background Numbering
- Preset Stamp
- User Stamp
- Date Stamp
- Page Numbering
- Changing the stamp Colour
- Changing the stamp position
- Specifying the first printing page and start number ("P1,P2...", "-1-,-2-...", "P.1,P.2...", "1,2...", "1,2...", "Page 1,Page 2...")
- Specifying the first printing page and start number ("1/5,2/5…")
- Specifying the first printing page and start number ("1-1,1-2…")
- Image Repeat
- Double Copies
- Centring
- Positive/Negative
- Mirror
- Covers
- Designate
- Chapters
- Slip Sheets
- Storing Data in the Document Server
- Programs
- 3. Document Server
- Relationship between Document Server and Other Functions
- Using the Document Server
- Storing Data
- To register or change a user name (When using a user name registered to the Address Book)
- To register or change a user name (When using a user name not registered to the Address Book)
- To register or change a user name (When no name is registered to the Address Book)
- To change a file name
- To set or change a Password
- Changing User Name, File Name or Password of a Stored Document
- Checking the Details of a Stored Document
- Searching for a Stored Document
- Printing a Stored Document
- Deleting a Document
- Displaying a Document in Document Server with Web Image Monitor
- Downloading Stored Documents
- Storing Data
- 4. Appendix
- INDEX
Copying from the Bypass Tray
35
2
A Open the bypass tray.
B Insert the paper face-down until you hear the beep, and then align the pa-
per guide to the paper size by pinching the clip.
If the guides are not flush against the copy paper, images might be skewed or
paper misfeeds might occur.
Do not stack paper over the limit mark, otherwise images might be skewed or
paper misfeeds might occur.
Swing out the extender to support paper sizes larger than A4
L
or 8
1
/
2
"
×
11"
L
.
Fan paper to get air between the sheets and avoid a multi-sheet feed.
A Extender
C Press [Bypass], and then press the {q} key.
D Select the size and type of the paper.
E Place the paper, and then press the {Start} key.
F
When the copy job is finished, press the
{
Clear Modes
}
key to clear the settings.
Note
❒ When the Sort function is selected, press the {q} key after all originals
have been scanned.
❒ When the beeper is turned off , it will not sound if you insert paper into the
bypass tray. See "Panel Tone", General Settings Guide.
Reference
See p.143 “Programming Defaults in Initial Display”.
AMF023S
AMF024S