Quick Start Guide
Table Of Contents
- Operating Instructions Copy/Document Server Reference
- Manuals for This Machine
- What You Can Do with This Machine
- What You Can Do with This Machine
- TABLE OF CONTENTS
- Notice
- How to Read This Manual
- Functions Requiring Optional Configurations
- Display
- User Tools Menu (Copier and Document Server Features)
- 1. Placing Originals
- 2. Copying
- Basic Procedure
- Job List
- Copying from the Bypass Tray
- Colour Functions
- Copier Functions
- Adjusting Copy Image Density
- Selecting the Original Type Setting
- Selecting Copy Paper
- Preset Reduce/Enlarge
- Zoom
- Auto Reduce/Enlarge
- Size Magnification
- Directional Magnification (%)
- Directional Size Magnification (mm)
- Sort
- Stack
- Staple
- Punch
- Duplex
- One-Sided Combine
- Two-Sided Combine
- Series Copies
- Booklet/Magazine
- Margin Adjustment
- Erase
- Background Numbering
- Preset Stamp
- User Stamp
- Date Stamp
- Page Numbering
- Changing the stamp Colour
- Changing the stamp position
- Specifying the first printing page and start number ("P1,P2...", "-1-,-2-...", "P.1,P.2...", "1,2...", "1,2...", "Page 1,Page 2...")
- Specifying the first printing page and start number ("1/5,2/5…")
- Specifying the first printing page and start number ("1-1,1-2…")
- Image Repeat
- Double Copies
- Centring
- Positive/Negative
- Mirror
- Covers
- Designate
- Chapters
- Slip Sheets
- Storing Data in the Document Server
- Programs
- 3. Document Server
- Relationship between Document Server and Other Functions
- Using the Document Server
- Storing Data
- To register or change a user name (When using a user name registered to the Address Book)
- To register or change a user name (When using a user name not registered to the Address Book)
- To register or change a user name (When no name is registered to the Address Book)
- To change a file name
- To set or change a Password
- Changing User Name, File Name or Password of a Stored Document
- Checking the Details of a Stored Document
- Searching for a Stored Document
- Printing a Stored Document
- Deleting a Document
- Displaying a Document in Document Server with Web Image Monitor
- Downloading Stored Documents
- Storing Data
- 4. Appendix
- INDEX
Copying
34
2
Copying from the Bypass Tray
Use the bypass tray to copy onto OHP transparencies, adhesive labels, translu-
cent paper, postcards and copy paper that cannot be loaded in the paper trays.
Important
❒ When the duplex unit is attached, the default is [1 Sided → 2 Sided]. When cop-
ying from the bypass tray, select [1 Sided] for copying in [Dup./Combine/Series]
(for example [1 Sided → 1 Sided] or [2 Sided → 1 Sided]). You can change the in-
itial settings. See "Programming Defaults in Initial Display".
❒ Paper has a vertical length of 90-305 mm (3.6-12 inch) and a horizontal length
of 148-457.2 mm (5.9-18 inch) can be copied from the bypass tray.
❒ The machine can detect the following sizes as regular size copy paper: A3L,
A4L, 8" × 13"L. If you want to use the size of paper other than the above, be
sure to specify the size.
❒ When copying on OHP transparencies or paper heavier than 81 g/m
2
(about
70 kg, 21 lb.), you need to specify the type and size of paper with "Special
Original".
❒ The maximum number of sheets you can load at the same time depends on
paper type. The maximum number of sheets should not exceed the upper lim-
it.
❒ When copying paper lighter than 59g/m
2
or tracing paper, you need to spec-
ify the paper type.
❒ When paper larger than 433 mm (17.1 inch) in size is used, the paper may be-
come wrinkled, may not be fed into the machine, or may cause paper jams.
❖ [Bypass Tray Usage] key
Press [Bypass Tray Usage] to display a description on using the bypass tray.