Quick Start Guide

9
❖ Input / Output
Stamp Position:-1-,-2-... You can set the position where the stamp is printed.
Stamp Position:P.1,P.2... You can set the position where the stamp is printed.
Stamp Position:1,2... You can set the position where the stamp is printed.
Stamp Position:1-1,1-2... You can set the position where the stamp is printed.
Stamp Position:Page 1,Page 2... You can set the position where the stamp is printed.
Superimpose You can have page numbers printed in white where they overlap
black parts of the image.
Stamp Colour You can set the selected priority colour when printing the date.
Page Numbering Initial
Letter
You can select the page numbering initial letter between "P.1,
P.2.../P.1, P.2..." and "S1, S2.../S.1, S.2...".
Item Description
Switch to Batch You can select to have the Batch or SADF function displayed when
you press [Special Original].
SADF Auto Reset When you set one original at a time in the ADF, the Auto Feed in-
dicator lights for a specified time after an original is fed, to show
the ADF is ready for another original.
Rotate Sort: Auto Paper
Continue
You can continue copying when paper of the required orientation
has run out during rotate-sorting.
This item becomes active when [With Image Rotation] of [Auto Tray
Switching] under [General Features] is selected.
Memory Full Auto Scan
Restart
If memory becomes full while scanning originals, the machine
will copy the scanned originals first, and then automatically pro-
ceed scanning remaining originals. You can enable or disable this
function.
Letterhead Setting If you select [Yes] for this function, the machine rotates images
correctly.
Staple Position You can select a key to appear preferentially for staple on the ini-
tial screen.
Punch Type You can select a key to appear preferentially for punch on the ini-
tial screen.
Simplified Screen: Finish-
ing Types
You can select a key to appear preferentially for finishing on the
simple screen.
Item Description