Operation Manual

Facsimile Features
168
4
I Select the size you want to program.
If you select [Standard Size], select a paper size displayed, and then proceed to
step
N
.
If you select [Custom Size], proceed to step
K
.
J Select the size you want to program from the sizes shown.
K Make sure that [Vertical] is selected.
L Enter the vertical size of the paper using the number keys, and then press
the {q} key.
Specify a vertical size from 210 mm (8.3") to 297 mm 11.6"). You cannot enter
a size smaller than 210 mm or larger than 297 mm.
Each time you press [mm] or [inch], the units switch between “mm” and
“inch”. If you enter a length and change the units by pressing [mm] or [inch],
it is converted automatically (fractions are rounded off).