Operation Manual

Special Senders to Treat Differently
167
4
D Press [Initial Set Up].
E Select the function you want to program.
In this feature, “Authorized RX” has the same settings as “Reception Set-
tings”.
F To programming Authorized RX and Special RX Function, press [Authorized
Reception] or [Special Reception Function].
G Press [On] or [Off], and then press [OK].
The illustration shows the “Authorized RX” display as an example.
H To programming Bypass Tray Paper Size, press [Bypass Tray Paper Size].
You can select a size from [Auto Detect], [Standard Size], or [Custom Size].
If you select [Auto Detect], proceed to steps
I
and
N
.
If you select [Standard Size], proceed to steps
I
,
J
and
N
.
If you select [Custom Size], proceed to steps
I
and
K
to
N
.