Operation Manual

Facsimile Features
166
4
Print 2 Sided
Specify when programming a Special Sender.
A Press [2 Sided Print per Sender].
B Press [On] or [Off], and then press [OK].
Note
❒ Selecting [Same as Basic Settings] will result in the same setting made for “2
Sided Print" of “Reception Settings".
Memory Lock
Specify when programming a Special Sender.
A Press [Memory Lock Reception per Sender].
B Press [On] or [Off], and then press [OK].
Note
❒ Selecting [Same as Basic Settings] will result in the same setting made for
“Program Memory Lock ID" under “Administrator Tools".
Paper Tray
Specify when programming a Special Sender.
A Press [Paper Tray per Sender].
B Select the tray you want to use, and then press [OK].
Note
❒ Selecting [Same as Basic Settings] will result in the same setting made for
“Paper Tray" of "Reception Settings".
Programming Initial Set Up of a Special Sender
Program the “Initial Set Up” of a Special Sender. You can also specify the Bypass
Tray Paper Size.
A Press [Facsimile Features].
B Press [Reception Settings].
C Press [Program Special Sender].