Quick Start Guide

Various Scan Settings
144
6
❖ Placing an Original in the ADF
Note
❒ Originals are normally rectangular ( ) or horizontally long ( ). However,
the table above uses squares to make original orientation easier to under-
stand. Even if the actual shape of the original is different, the combination
of original orientation and the orientation specified on the scanner driver
does not change.
❒ For details about the Scanner Control dialog box, see "Basic Network
TWAIN Scanner Operation".
❒ Depending on the settings, originals of different sizes are scanned differ-
ently.
Reference
p.109 “Basic Network TWAIN Scanner Operation”.
When Scanning Originals of Mixed Sizes Using TWAIN Scanner
This section explains the differences between scanning mixed-size originals us-
ing the TWAIN scanner and normal scanning.
•If [Auto detect(Mixed-size))] is selected in the [Original Size:] list, the machine de-
tects the length of each same-width original and then scans them.
•If [Auto detect(Uni-size)] is selected in the [Original Size:] list, the machine detects
the size of the first original of the batch and scans all subsequent originals at
that size.
Original Orientation TWAIN Scanner Control Dialog Box Key
top edge of original placed first
top edge touches rear of ADF