Quick Start Guide

Various Scan Settings
118
6
D Specify Original Size (X1 and Y1) using the number keys, and then press {q}.
For example, set X1 to 300 mm and Y1 to 200 mm.
E Specify Start Position (X2 and Y2) using the number keys, and then press
{q}.
For example, set X2 to 30 mm and Y2 to 20 mm.
F Specify Scan Area (X3 and Y3) using the number keys, and then press {q}.
For example, set X3 and Y3 to 80 mm.
G Press [OK].
H Check Scan Area (X3 and Y3) are displayed above [Custom Size], and then
press [OK].