Operating instructions

Registering Addresses and Users for Facsimile/Scanner Functions

208

Programming the SUB Code

This section describes how to program the SUB Code.

A Press [Adv. Features], and then press [SUB Code].

B Press [Change] under "TX SUB Code".

C Enter the SUB Code, and then press [OK].

D To enter the password, press [Change] under "Password (SID)".

E Enter the password, and then press [OK].

F Press [OK].

Programming the SEP Code

This section describes how to program the SEP Code.

A Press [Adv. Features], and then press [SEP Code].

B Press [Change] under "RX SEP Code".

C Enter the SEP Code, and then press [OK].

D To enter the password, press [Change] under "Password (PWD)".

E Enter the password, and then press [OK].

F Press [OK].

Setting the International TX Mode

This section describes how to set the International TX Mode.

A Press [Change] under "International TX Mode".

B Select [Off] or [On], and then press [OK].

Selecting the Fax Header

This section describes how to select the fax header.

You can register the fax header in Program Fax Information in the system set-

tings for Facsimile Features.

A Press [Change] under "Fax Header".

B Select [1st Name] or [2nd Name], and then press [OK].

Reference

p.116 “Registering Fax Information”