Operating instructions

Facsimile Features
96
4
❖ Program Fax Information
Program information to be shown on the display of the other machine and
printed as a report. Fax Header,Own Name, and Own Fax Number can be
programmed.
For details about how to program Fax Information, see "Registering Fax In-
formation".
❖ Scan End Reset
Use this function to return to the initial settings each time an original is
scanned.
The default setting is On.
❖ TX Stamp Priority
Use this function to press a TX stamp.
The default setting is Off.
❖ Line Priority Setting
Specify the line to be used.
The display may differ depending on the line type you have.
❖ Program Economy Time
Specifying a time for transmission when call charges are low.
You can program only one Economy Time.
The default setting is 23:00.
If you make a mistake, press [Clear] or the {Clear/Stop} key before pressing
[OK], and then try again.
❖ On Hook Mode Release Time
Specify a time to cancel On Hook mode after you transmit using On Hook di-
aling.
The default setting is 3 minutes.