User's Manual

3. Press the [Program] key.

CMT001

4. Press [Program].

5. Press the program number you want to register.

6. Enter the program name.

7. Press [OK].

8. Press [Exit] twice.

• The number of characters you can enter for a program name varies depending on the functions as

follows:

• Copier: 34 characters

• Document Server: 34 characters

• Facsimile: 20 characters

• Scanner: 34 characters

• When a specified program is registered as the default, its values become the default settings, which

are displayed without pressing the [Program] key, when modes are cleared or reset, and after the

machine is turned on. See "Changing the Default Functions of the Initial Screen", Convenient

Functions .

• When the paper tray you specified in a program is empty and if there is more than one paper tray

with the same size paper in it, the paper tray prioritized under [Paper Tray Priority: Copier] or

[Paper Tray Priority: Facsimile] in the [Tray Paper Settings] tab will be selected first. For details, see

"System Settings", Connecting the Machine/ System Settings .

Registering Functions in a Program