User's Manual

Message Causes Solutions
"The program contains a
destination(s) that does not
have a certificate."
There is no user certificate
(destination certificate).
For details about the user certificate
(destination certificate), see Security
Guide .
"The specified destination
for Email TX Result, which is
registered to the program,
has no certificate for
encryption."
There is no user certificate
(destination certificate).
For details about the user certificate
(destination certificate), see Security
Guide .
"The specified destinations
for Email TX Result, which is
registered to the program,
contain a destination(s) that
has no certificate for
encryption."
There is no user certificate
(destination certificate).
For details about the user certificate
(destination certificate), see Security
Guide
.
"The device certificate used
for the S/MIME signature is
not currently valid. XXX
which is registered to the
program cannot be
recalled."
(XXX indicates the e-mail
destination(s) or
destination(s) for [Email TX
Results].)
The device certificate (S/
MIME) has expired.
For details about the device certificate
(S/MIME), see Security Guide .
"XXX cannot be YYY
because there is a problem
with the device certificate
used for the S/MIME
signature. Check the device
certificate."
(XXX and YYY indicate the
user action.)
There is no device certificate
(S/MIME), or the certificate
is invalid.
For details about the device certificate
(S/MIME), see Security Guide .
When Messages Are Displayed on the Control Panel
167