User's Manual

Message Causes Solutions
"Connection with LDAP
server has failed. Check the
server status."
A network error has occurred
and connection has failed.
Try the operation again. If the message
is still shown, the network may be busy.
Check the settings for LDAP server in
[System Settings]. For details about
settings for LDAP server, see
"Programming the LDAP server",
Connecting the Machine/ System
Settings .
"Error occurred, and
transmission was
cancelled."
• Original jammed during
Immediate Transmission.
•
A problem occurred in
the machine, or noise
occurred on the
telephone line.
Press [Exit], and then send the
documents again.
"Exceeded max. number to
display. Max. No.: n"
(A figure is placed at n.)
The number of search results
has exceeded the maximum
number of items that can be
displayed.
Search again after changing the
search conditions.
"Exceeded time limit for
LDAP server search. Check
the server status."
A network error has occurred
and connection has failed.
• Try the operation again. If the
message is still shown, the
network may be busy.
•
Check that the correct settings for
LDAP server are listed in
[Administrator Tools] of [System
Settings]. For details about LDAP
server, see "Programming the
LDAP server", Connecting the
Machine/ System Settings
.
When Messages Are Displayed on the Control Panel
163