Specifications

Product Support Guide
Model D127/D128
Ver. 1.2 Page 9 of 36 8/23/2012
Subject to change without notice
Installation
Installation Requirements
Temperature Range:
10 C to 32 C (50 F to 89.6 F)
Humidity Range:
15% to 80% RH
Ambient Illumination:
Less than 1,500 lux (do not expose to direct sunlight)
Ventilation:
3 times/hr/person
Ambient Dust:
Less than 0.1 mg/m
3
Avoid areas exposed to sudden temperature changes:
Areas directly exposed to to direct sunlight or to direct air (from a fan, air
conditioner, air cleaner etc.)
Do not place machine where it will be exposed to corrosive gas or vapor.
Place the machine on a firm and level base.
Do not place the machine where it may be subject to strong vibrations.
Machine level
Front to back: within 5mm (0.2”) of level
Right to left: within 5mm (0.2”) of level
Power Requirements
Input voltage level: 120 V, 60Hz,15A
Image quality not guaranteed at a rate voltage higher than+/-10%
Operation not guaranteed at a rate voltage higher than +/- 15%
Do not place anything on power cord.
The required wall outlet is a NEMA 5-15R (receptacle)
Space
Foot Print
A (Front)
750 mm (29.6”)
B (Left)
100 mm (3.9”)
C (Rear)
100 mm (3.9”)
D (Right)
100 mm (3.9”)
E Depth
450 mm (17.7”)
F Width
476 mm (18.7”)
The 750 mm front space is sufficient to allow the paper tray to
be pulled out. Additional space is required to allow an
operator to stand at the front of the machine.
Dimensions (W x D x H):: 476 x 450 x 451mm (18.74” x 17.72” x 17.76”)