Service manual

Bit Switches
SM Appendix 5-39 D127/D128
Appendix:
Fax Trouble-
Shooting
Guide
2
Remote switch setting for
AUTO mode
0: OFF 1: ON
Determines whether remote switching is ON/OFF
on auto receiving, in AUTO mode.
3-7 Not used Do not change the settings
Communication Switch 05 [SP No. 1-104-006]
No FUNCTION COMMENTS
0-3
Number setting for remote
switching
00-09 (0-9: HEX)
Selects the handset number pushed to switch
between TEL/FAX.
4-7 Not used Do not change the settings
Communication Switch 06 - Not used (do not change the settings)
Communication Switch 07 - Not used (do not change the settings)
Communication Switch 08 - Not used (do not change the settings)
Communication Switch 09 [SP No. 1-104-010]
No FUNCTION COMMENTS
0-7 IP-Fax dial interval setting
Adjusts the interval of the IP-fax dialing.
The interval of IP-fax dialing is calculated by
following formula.
[Interval time = specified value with this switch x 2
sec]