Service manual

Bit Switches
D127/D128 5-14 SM Appendix
System Switch 0E [SP No. 1-101-015]
No FUNCTION COMMENTS
0-1 Not used Do not change the settings.
2 Not used This machine does not have the capture function.
3
Memory storing while the
handset used
Enabled/Disabled selection
[0: Disabled 1: Enabled]
Manual receive is disabled while this function is
Enabled (1).
4-7 Not used Do not change these settings.
System Switch 0F [SP No. 1-101-016]
No FUNCTION COMMENTS
0-7
Country/area code for functional
settings (Hex)
This country/area code determines the
factory settings of bit switches and RAM
addresses. However, it has no effect on
the NCU parameter settings and
communication parameter RAM
addresses.
Cross reference
NCU country code:
SP No. 2-103-001 for G3-1
00: France 11: USA
01: Germany 12: Asia
02: UK 13: Japan
03: Italy 14: Hong Kong
04: Austria 15: South Africa
05: Belgium 16: Australia
06: Denmark 17: New Zealand
07: Finland 18: Singapore
08: Ireland 19: Malaysia
09: Norway 1A: China
0A: Sweden 1B: Taiwan
0B: Switz. 1C: Korea